Mysqldump одной таблицы пример. Делаем дамп (бэкап) базы данных, используя утилиту mysqldump
Memcached - программное обеспечение, реализующее сервис кэширования данных в оперативной памяти на основе хеш-таблицы.
Memcached - система кэширования в оперативной памяти, обладающая высокой производительностью, которая используется в основном для ускорения сайтов, которые интенсивно используют базу данных.
Большинство современных языков программирования поддерживают библиотеки Memcached , в том числе PHP , Perl , Ruby и Python . Memcached работает в ОЗУ, потому обмен данными происходит практически мгновенно.
Установка
PORT
: Порт по умолчанию для использования Memcached.
USER
: Пользователь от которого запущен Memcached.
MAXCONN
: Максимальное количество соединений Memcached.
CACHESIZE
: Размер кеша для памяти.
OPTIONS
: Установите IP-адрес сервера, чтобы веб-серверы Apache или Nginx могли подключаться к нему.
После перезапускаем сервис systemctl restart memcached .
Добавляем сервис в автозапуск systemctl enable memcached .
Memory object caching systems like Memcached can optimize backend database performance by temporarily storing information in memory, retaining frequently or recently requested records. In this way, they reduce the number of direct requests to your databases.
Because systems like Memcached can contribute to denial of service attacks if improperly configured, it is important to secure your Memcached servers. In this guide, we will cover how to protect your Memcached server by binding your installation to a local or private network interface and creating an authorized user for your Memcached instance.
Prerequisites
This tutorial assumes that you have a server set up with a non-root sudo user and a basic firewall. If that is not the case, set up and install the following:
- One CentOS 7 server, set up following our .
- FirewallD, configured following the section of our guide on using FirewallD with CentOS 7.
With these prerequisites in place, you will be ready to install and secure your Memcached server.
Installing Memcached from Official Repositories
If you don"t already have Memcached installed on your server, you can install it from the official CentOS repositories. First, make sure that your local package index is updated:
- sudo yum update
Next, install the official package as follows:
- sudo yum install memcached
We can also install libmemcached , a library that provides several tools to work with your Memcached server:
- sudo yum install libmemcached
Memcached should now be installed as a service on your server, along with tools that will allow you to test its connectivity. We can now move on to securing its configuration settings.
Securing Memcached Configuration Settings
To ensure that our Memcached instance is listening on the local interface 127.0.0.1 , we will modify the OPTIONS variable in the configuration file located at /etc/sysconfig/memcached . We will also disable the UDP listener. Both of these actions will protect our server from denial of service attacks.
You can open /etc/sysconfig/memcached with vi:
Locate the OPTIONS variable, which will initially look like this:
/etc/sysconfig/memcached
OPTIONS=""
Binding to our local network interface will restrict traffic to clients on the same machine. We will do this by adding -l 127.0.0.1 to our OPTIONS variable. This may be too restrictive for certain environments, but it can make a good starting point as a security measure.
Because UDP protocol is much more effective for denial of service attacks than TCP, we can also disable the UDP listener. To do this, we will add the -U 0 parameter to our OPTIONS variable. The file in full should look like this:
/etc/sysconfig/memcached
PORT="11211" USER="memcached" MAXCONN="1024" CACHESIZE="64" OPTIONS="-l 127.0.0.1 -U 0 "
Save and close the file when you are done.
Restart your Memcached service to apply your changes:
Verify that Memcached is currently bound to the local interface and listening only for TCP connections by typing:
- sudo netstat -plunt
You should see the following output:
Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name . . . tcp 0 0 127.0.0.1 :11211 0.0.0.0:* LISTEN 2383/memcached . . .
This confirms that memcached is bound to the 127.0.0.1 address using only TCP.
Adding Authorized Users
To add authenticated users to your Memcached service, it is possible to use Simple Authentication and Security Layer (SASL), a framework that de-couples authentication procedures from application protocols. We will enable SASL within our Memcached configuration file and then move on to adding a user with authentication credentials.
Configuring SASL Support
We can first test the connectivity of our Memcached instance with the memstat command. This will help us establish that SASL and user authentication are enabled after we make changes to our configuration files.
To check that Memcached is up and running, type the following:
- memstat --servers="127.0.0.1"
Now we can move on to enabling SASL. First, we can add the -S parameter to our OPTIONS variable in /etc/sysconfig/memcached , which will enable SASL. Open the file again:
- sudo vi /etc/sysconfig/memcached
We will add both the -S and -vv parameters to our OPTIONS variable. The -vv option will provide verbose output to /var/log/memcached , which will help us as we debug. Add these options to the OPTIONS variable as follows:
/etc/sysconfig/memcached
OPTIONS="-l 127.0.0.1 -U 0 -S -vv "
Save and close the file.
- sudo systemctl restart memcached
Next, we can take a look at the logs to be sure that SASL support has been enabled:
- sudo journalctl -u memcached
You should see the following line, indicating that SASL support has been initialized:
Mar 05 18:16:11 memcached-server memcached: Initialized SASL. . . .
We can check the connectivity again, but because SASL has been initialized, this command should fail without authentication:
- memstat --servers="127.0.0.1"
This command should not produce output. We can type the following to check its status:
- echo $?
$? will always return the exit code of the last command that exited. Typically, anything besides 0 indicates process failure. In this case, we should see an exit status of 1 , which tells us that the memstat command failed.
Adding an Authenticated User
Now we can download two packages that will allow us to work with the Cyrus SASL Library and its authentication mechanisms, including plugins that support PLAIN authentication schemes. These packages, cyrus-sasl-devel and cyrus-sasl-plain , will allow us to create and authenticate our user. Install the packages by typing:
- sudo yum install cyrus-sasl-devel cyrus-sasl-plain
Next, we will create the directory and file that Memcached will check for its SASL configuration settings:
- sudo mkdir -p /etc/sasl2
- sudo vi /etc/sasl2/memcached.conf
Add the following to the SASL configuration file:
/etc/sasl2/memcached.conf
Mech_list: plain log_level: 5 sasldb_path: /etc/sasl2/memcached-sasldb2
In addition to specifying our logging level, we will set mech_list to plain , which tells Memcached that it should use its own password file and verify a plaintext password. We will also specify the path to the user database file that we will create next. Save and close the file when you are finished.
Now we will create a SASL database with our user credentials. We will use the saslpasswd2 command to make a new entry for our user in our database using the -c option. Our user will be sammy here, but you can replace this name with your own user. Using the -f option, we will specify the path to our database, which will be the path we set in /etc/sasl2/memcached.conf:
- sudo saslpasswd2 -a memcached -c -f /etc/sasl2/memcached-sasldb2 sammy
Finally, we want to give the memcached user ownership over the SASL database:
- sudo chown memcached:memcached /etc/sasl2/memcached-sasldb2
Restart the Memcached service:
- sudo systemctl restart memcached
Running memstat again will confirm whether or not our authentication process worked. This time we will run it with our authentication credentials:
- memstat --servers="127.0.0.1" --username=sammy --password=your_password
You should see output like the following:
Server: 127.0.0.1 (11211) pid: 3831 uptime: 9 time: 1520028517 version: 1.4.25 . . .
Our Memcached service is now successfully running with SASL support and user authentication.
Allowing Access Over the Private Network
We have covered how to configure Memcached to listen on the local interface, which can prevent denial of service attacks by protecting the Memcached interface from exposure to outside parties. There may be instances where you will need to allow access from other servers, however. In this case, you can adjust your configuration settings to bind Memcached to the private network interface.
Note:
We will cover how to configure firewall settings using FirewallD
in this section, but it is also possible to use DigitalOcean Cloud Firewalls to create these settings. For more information on setting up DigitalOcean Cloud Firewalls, see our . To learn more about how to limit incoming traffic to particular machines, check out the section of this tutorial on and our discussion of .
Limiting IP Access With Firewalls
Before you adjust your configuration settings, it is a good idea to set up firewall rules to limit the machines that can connect to your Memcached server. If you followed the prerequisites and installed FirewallD on your server and do not plan on connecting to Memcached from another host, then you do not need to adjust your firewall rules. Your standalone Memcached instance should be listening on 127.0.0.1 , thanks to the OPTIONS variable we defined earlier, and there should therefore be no concerns about incoming traffic. If you plan to allow access to your Memcached server from other hosts, however, then you will need to make changes to your firewall settings using the firewall-cmd command.
Begin by adding a dedicated Memcached zone to your firewalld policy:
- sudo firewall-cmd --permanent --new-zone=memcached
Then, specify which port you would like to keep open. Memcached uses port 11211 by default:
- sudo firewall-cmd --permanent --zone=memcached --add-port=11211/tcp
Next, specify the private IP addresses that should be allowed to access Memcached. For this, you will need to know your client server"s private IP address :
- sudo firewall-cmd --permanent --zone=memcached --add-source=client_server_private_IP
Reload the firewall to ensure that the new rules take effect:
- sudo firewall-cmd --reload
Packets from your client"s IP address should now be processed according to the rules in the dedicated Memcached zone. All other connections will be processed by the default public zone.
With these changes in place, we can move on to making the necessary configuration changes to our Memcached service, binding it to our server"s private networking interface.
Binding Memcached to the Private Network Interface
The first step in binding to our server"s private networking interface will be modifying the OPTIONS variable we set earlier.
We can open /etc/sysconfig/memcached again by typing:
- sudo vi /etc/sysconfig/memcached
Inside, locate the OPTIONS variable. We can now modify -l 127.0.0.1 to reflect our Memcached server"s private IP:
/etc/sysconfig/memcached
OPTIONS="-l memcached_servers_private_IP -U 0 -S -vv"
Save and close the file when you are finished.
Restart the Memcached service again:
- sudo systemctl restart memcached
Check your new settings with netstat to confirm the change:
- sudo netstat -plunt
Test connectivity from your external client to ensure that you can still reach the service. It is a good idea to also check access from a non-authorized client to ensure that your firewall rules are effective.
Conclusion
In this tutorial we have covered how to secure your Memcached server by configuring it to bind to your local or private network interface, and by enabling SASL authentication.
В этой заметке я не буду подробно останавливаться на вопросе что это такое. Если возник вопрос «как его поставить», то значит ответ на «что это такое» (хотя бы примерный) у вас уже есть! 🙂
Но в общих чертах memcache — это специальная программа позволяющая кешировать данные (к примеру, результаты SQL-запросов, готовые результаты работы скриптов, изображения = вобщем, любые необходимые в работе объекты) в оперативную память сервера. Эта память в сотни (иногда — тысячи) раз быстрее чем жесткие диски, поэтому хранение данных в ней хотя и более дорого, но в разы эффективнее по быстродействию что очень положительно сказывается как на нагрузке на сервер, так и по скорости работы скриптов сайтов.
Как установить memcache на веб-сервер.
Установите сам сервер memcached
Yum -y install memcached
Отредактируйте его конфиг так, чтобы он слушал только сам сервер и не обрабатывал запросы извне (это вопрос как здравого смысла, так и безопасности — зачем кому-то видеть что там у вас в памяти заскладировано?)
Для этого откройте на редактирование файл /etc/sysconfig/memcached
И замените строку OPTIONS на
OPTIONS="-l 127.0.0.1"
По-умолчанию в этом же конфиге для работы memcache указано что для хранения данных выделяется 64 МБ оперативной памяти. Если нужно установить больше, то просто измените значение в строке
CACHESIZE ="64"
на желаемое.
Но помните , что без необходимости выделять слишком много памяти, особенно если она потом не будет использоваться вся — тоже вредно! (хотя бы по той причине, что ОЗУ — это достаточно ценный ресурс веб-сервера, имеющий свойство заканчиваться в самый неподходящий момент)
Теперь осталось запустить демон memcache и добавить его в автозагрузку (иначе при перезапуске всего сервера его придётся стартовать вручную):
/etc/init.d/memcached start chkconfig memcached on
Последние шаги — установить модуль memcache:
Yum -y install php-pecl-memcache
….и перезапустить apache:
/etc/init.d/httpd restart
В конце вот так можно проверить — слушает ли memcache порт 11211: .
Всё. Теперь достаточно в настройках кеширования сайта указать
Адрес сервера : 127.0.0.1 (или localhost — это одно и то же)
Порт : 11211
И наслаждаться всеми плюсами этого способа кеширования.
Часто задаваемые вопросы
-
Установка прав для одного файла:
chmod 644 /path/to/file/filename.ext где,- /path/to/file/ - путь к файлу от корня
- filename.ext - имя файла
Как установить права на все файлы (вместе с файлами во вложенных папках)
Перейдите в папку, где находятся файлы и выполните: find . -type f -exec chmod 644 {} \; - 1) SSH-клиент
- 2) Данные для подключения к серверу (его IP-адрес, имя пользователя и пароль) - их можно получить у провайдера, предоставившего Вам сервер.
Самый простой способ удалить всё содержимое файла (очистить его) - скопировать в него "содержимое" файла /dev/null (/dev/null в *nix - синоним пустоты. Всё что копируется в него - пропадает, всё что копируется из него - является пустотой).
Сделать это можно выполнив:
Cp /dev/null file.ext
, где file.ext - имя очищаемого файла.
Самый простой способ - выполнить команду:
Find /path/to/folder | wc -l
Где /path/to/folder - путь к проверяемой папке от корня диска.
Find . -mindepth 2 | awk -F/ "{ print $2"/" }" | sort | uniq -c | sort -n
Но часто таких деталей не нужно - достаточно увидеть 2-3 папки в которых больше всего элементов. Для этого в конце той же команды допишите | tail -3 ("3" в ней - это количество элементов, которые будут показаны ):
Find . -mindepth 2 | awk -F/ "{ print $2"/" }" | sort | uniq -c | sort -n | tail -3
Как оказалось, многие пользователи не знают, как подключиться к серверу по shh (получить доступ к его консоли) для дальнейшей работы с ним. В этой заметке я постараюсь исправить этот пробел в знаниях! :) Для подключения по SSH к удалённому серверу нужно не так уж и много:
Начнём с первого пункта.
Подключение по SSH из Windows"а
Для всех версий windows схема одинакова. Сначала нужно скачать специальную программу-клиент под названием putty: http://www.chiark.greenend.org.uk/~sgtatham/putty/download.html (кликнуть по putty-0.63-installer.exe ) установить её и запустив ввести адрес сервера в поле HostName (в поле Port должно быть значение 22):
Подключение по ssh программой Putty
Подтвердите, что узел является доверенным
Введите имя пользователя
После этого введите пароль и всё - Вы подключились к серверу по ssh!
Внимание! При вводе пароля, из соображений безопасности не отображаются даже "звёздочки"! Так и должно быть - просто наберите пароль и нажмите "Enter "
Подключение по SSH из Linux"а
Если же на рабочем компьютере установлена любая версия любого линукса, то всё очень просто - откройте терминал и введите команду вида
и введите пароль где, username - имя пользователя. 111.222.333.444 - IP-адрес сервера Если подключение производится впервые - также нужно будет подтвердить свои намерения набрав слово "yes " и нажав "Enter ".